TerraX Extends Crestaurum Zone to 300 Meters Vertical Depth, Doubling Size of Known Mineralized Structure

Gold, Silver & Base Metals

May 8, 2018 (Source) — TerraX Minerals Inc. (TSXV: TXR) (FSE: TX0) (OTC Pink: TRXXF) is pleased to announce assay results from the remaining 11 holes drilled at the Yellowknife City Gold project this winter. Four of these holes (1,170 m) were drilled on the high-grade Crestaurum gold bearing structure to test whether gold mineralization continued to depth. All four holes hit mineralized structure, with two holes containing visible gold. All holes intersected significant gold with selected intervals of:

  • 8.84 g/t Au over 2.49 m and 5.38 g/t Au over 0.63 m in hole TCR18-076
  • 3.08 g/t Au over 2.80m, and 5.57 g/t Au over 2.06 m, in hole TCR18-078
  • 13.30 g/t Au over 1.24 m, and 4.41 g/t Au over 0.80 m, in hole TCR18-079
  • 3.86 g/t Au over 0.56 m in hole TCR18-077

The upper portion of the Crestaurum structure has been previously drilled with 187 drill holes over 1.4 kilometers of strike length, from surface down to a depth of approximately 100-150 meters depth, outlining a lode style shear and vein deposit (including 5.00 m @ 62.90 g/t Au, news release October 2, 2013). Although the structure is very continuous the high grade lodes are more discrete and these initial widespread deeper holes were designed to intersect structure to determine whether there was probability of high grade lodes continuing at depth potentially doubling the size of the mineralized zones. A drill hole location map can be found here and a long section of the Crestaurum main shear are available here.

Joe Campbell, CEO of TerraX, states “This small program of four holes successfully demonstrated that the Crestaurum zone continues at depth on multiple surfaces, potentially doubling the size of the zone. The 300 meter vertical depth tested with these holes is still considered very shallow for Archean lode gold deposits and mineralization remains open for further expansion, both along strike and at depth.”

TerraX also tested the Sam Otto west zone, another lode style shear and vein deposit near TerraX’s Sam Otto Main zone (1.90 m @ 13 96 g/t Au, news release May 2, 2017). This drilling included 5 holes totaling 2,081 m testing strike and depth potential (down to 250 meters vertical) on this zone. All holes hit gold mineralized structure with best results of 3.00 g/t Au over 2.69 m in hole TSO18-038, 1.06 g/t Au over 4.00 m in hole TSO18-041, and 1.32 g/t Au over 2.70 m in hole TSO18-036. All holes included intersections of 2.0 to 5.6 meters of 0.71 to 0.81 g/t Au. The continuous presence of the gold mineralized structures that now extend over more than a kilometer of strike and 250 meters of depth, with alteration and mineralization styles like the high grade zones from the nearby Con and Giant mines, makes this a good target for continued exploration.

A single hole (TSO18-039, 430 meters) was drilled approximately 500 m south along strike from the Sam Otto Main zone, and 600 meters north of TSO18-037 (1.92 g/t Au over 11.52 meters, news release Mach 9, 2018). This hole confirmed the continuity of the Sam Otto structure between the known extents of the Sam Otto Main and Sam Otto South zones, intersecting a broad zone of deformation and alteration (0.10 g/t Au over 157.75 m) consistent with the Sam Otto style of mineralization, including multiple 2.50 m – 9.10 m wide zones of 0.35 g/t Au — 0.82 g/t Au.

All holes were drilled approximately normal to projected strike and dip of the zones of mineralization and are interpreted to be approximately 80-95% of true thickness

Drill Hole Dip Azimuth UTM Location   From (m) To (m) Interval (m) Au g/t
Easting Northing
TCR18-076 -60 302 636205 6941766 223.70 226.19 2.49 8.84
326.73 327.36 0.63 5.38
TCR18-077 -60 303 636101 6941776 167.68 168.24 0.56 3.86
263.30 269.61 6.31 0.27
TCR18-078 -77 299 636058 6941875 57.00 57.50 0.50 1.75
94.50 98.30 3.80 2.29
incl. 94.50 97.30 2.80 3.08
218.00 229.15 11.15 1.15
incl. 227.09 229.15 2.06 5.57
TSO18-079 -83 298 636177 6941968 102.88 104.12 1.24 13.30
116.15 118.15 2.00 1.66
178.15 178.65 0.50 2.73
280.56 281.36 0.80 4.41
Sam Otto – West
Drill Hole Dip Azimuth UTM Location   From (m) To (m) Interval (m) Au g/t
Easting Northing
TSO18-036 -51 286 639529 6944767 169.30 173.00 3.70 0.57
incl. 171.35 173.00 1.65 1.06
234.74 240.37 5.63 0.81
incl. 236.50 239.20 2.70 1.31
TSO18-038 -52 286 639619 6944944 186.70 200.27 13.57 0.67
incl. 197.58 200.27 2.69 3.00
TSO18-040 -53 283 639649 6941766 24.30 25.00 0.70 0.71
181.00 183.00 2.00 0.74
264.50 266.00 1.50 0.63
TCR18-041 -54 286 639663 6945223 99.00 101.00 2.00 0.71
113.00 115.00 2.00 0.40
126.00 130.00 4.00 1.06
144.40 145.40 1.00 0.89
TCR18-042 -55 272 639844 6945172 119.00 120.00 1.00 0.99
133.00 136.50 3.50 0.47
148.00 149.00 1.00 1.59
212.50 214.00 1.50 1.54
311.00 313.00 2.00 0.54
335.18 336.00 0.82 0.56
356.00 357.50 1.50 1.63
Sam Otto Main – Sam Otto South Connection
Drill Hole Dip Azimuth UTM Location   From (m) To (m) Interval (m) Au g/t
Easting Northing
TSO18-039 -50 271 369852 6944057 Deformation and alteration 121.75-279.50 (157.75m)
121.75 139.00 17.25 0.20
incl. 121.75 127.00 5.25 0.44
207.40 216.50 9.10 0.35
incl. 207.40 211.50 4.10 0.56
242.85 248.00 5.15 0.56
277.00 279.50 2.50 0.82


The 2018 winter drill program at the Yellowknife City Gold project is now complete. TerraX drilled 3,681 meters and collected 2,331 samples for assay from the drilling reported here. Results ranged from below detection to 21.8 g/t Au. Drill hole collar locations were surveyed to sub-meter accuracy. Down hole surveying was completed on all holes. TerraX inserts certified standards and blanks into the sample stream as a check on laboratory QC. Drill core samples are cut by diamond saw at TerraX’s core facilities in Yellowknife. A halved core sample is left in the core box. The other half core is sampled and transported by TerraX personnel in securely sealed bags to ALS Chemex’s (ALS) preparation laboratory in Yellowknife. After sample preparation, samples are shipped to ALS’s Vancouver facility for gold and ICP analysis. Gold assays of >3 g/t are re-assayed on a 30 gm split by fire assay with a gravimetric finish. ALS is a certified and accredited laboratory service. ALS routinely inserts certified gold standards, blanks and pulp duplicates, and results of all QC samples are reported.

The technical information contained in this news release has been approved by Joseph Campbell, the Chief Executive Officer of TerraX, who is a Qualified Person as defined in “National Instrument 43-101, Standards of Disclosure for Mineral Projects.”

About the Yellowknife City Gold Project

The Yellowknife City Gold (“YCG”) project encompasses 772 sq km of contiguous land immediately north, south and east of the City of Yellowknife in the Northwest Territories. Through a series of acquisitions, TerraX controls one of the six major high-grade gold camps in Canada. Being within 10 km of the City of Yellowknife, the YCG is close to vital infrastructure, including all-season roads, air transportation, service providers, hydro-electric power and skilled tradespeople.

The YCG lies on the prolific Yellowknife greenstone belt, covering 70 km of strike length along the main mineralized break in the Yellowknife gold district, including the southern and northern extensions of the shear system that hosted the high-grade Con and Giant gold mines. The project area contains multiple shears that are the recognized hosts for gold deposits in the Yellowknife gold district, with innumerable gold showings and recent high-grade drill results that serve to indicate the project’s potential as a world-class gold district.

For more information on the YCG project, please visit our web site at www.terraxminerals.com.

On behalf of the Board of Directors


Joe Campbell

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains forward-looking information, which involves known and unknown risks, uncertainties and other factors that may cause actual events to differ materially from current expectation. Important factors – including the availability of funds, the results of financing efforts, the completion of due diligence and the results of exploration activities – that could cause actual results to differ materially from the Company’s expectations are disclosed in the Company’s documents filed from time to time on SEDAR (see www.sedar.com). Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release. The company disclaims any intention or obligation, except to the extent required by law, to update or revise any forward-looking statements, whether as a result of new information, events or otherwise.